If you’re looking for an MXR Super Comp vs Dyna Comp comparison, you’ve come to the right post!
MXR M132 Supercomp
MXR is pretty well-known for its straightforward yet effective pedals.
Their M132 Supercomp puts a compressor effect into a very pedalboard-friendly format.
Additionally, it also simplifies the parameter controls while still keeping the pedal super practical and functional.
M132 Supercomp comes with only three basic knobs.
Aside from the output volume control, we also have sensitivity and attack.
The attack parameter sets how aggressive or soft the compression effect will kick in.
As you may already know, dynamic compression makes louder parts quieter and quiet parts louder.
So the attack control will determine how fast it would get to the quieter or louder setting depending on the set radio parameter.
And, on this pedal, sensitivity is essentially the ratio or the amount of compression that will be applied.
Other than that, M132 is pretty rugged and fits right in with a regular pedalboard.
It’s also a fairly affordable one that’s pretty easy to use.
The pedal is also marketed as a “true hardwire bypass.”
There’s some conflicting info online on what that actually means.
In most cases, it’s a fancy way of saying that it has a buffered section in the circuitry, so this may be a bit misleading.
Overall, it’s a pretty great pedal if you don’t feel like bothering with more than three parameters.
It would be cool to know more about the maximum and minimum ratio on the pedal.
The same can be said about the attack parameter.
But if you’re getting one of these, you shouldn’t care too much about it.
Set it the way it works for you and you’ll be good to go.
MXR Dyna Comp
However, in case you want to keep it even simpler, then there’s the Dyna Comp.
Now, when we say Dyna Comp, there are actually a few pedals with this label.
Generally speaking, we’re referring to the basic MXR M102 Dyna Comp.
There’s also the CSP102SL variant that comes with a CA3080 chip, making the tones sound more vintage-ish.
The Deluxe variant, or M228, comes with more controls.
There’s also a mini-sized version M291.
M102 is well-known for its very simple layout.
It has an input, output, footswitch, and two knobs for output and sensitivity.
The attack is always set to 5 milliseconds and the release is 1 second.
The idea was to have a super-simplified compressor pedal.
It’s particularly useful to anyone not wanting to deal with a bunch of knobs.
The Deluxe variant has an attack button that toggles between slow and fast attack times.
What makes the Deluxe version super-interesting is the “clean” control.
It lets the unprocessed signal through which provides a different twist to tone-shaping options.
The mix of uncompressed and compressed tones will allow you to make the right balance for your needs.
The Mini version, or M291, comes with two knobs for output and sensitivity.
Additionally, M291 is equipped with an attack toggle switch, letting you choose between fast and slow operations.
One great thing about the Mini variant is that it’s super-compact, leaving you more room on your pedalboard.
There’s also a bass guitar version, the M282.
This one has the same controls as the Deluxe variant but comes in a smaller casing.
However, everything always goes back to the classic simple M102 variant.
I’d say that this is one of the best compression pedals for those who like it simple.
The CSP102SL variant is more expensive but it does bring that vantage-ish twist.
MXR Supercomp Vs Dyna Comp: How Do They Compare
What you might have noticed is that both of these are pretty straightforward.
Supercomp comes with three basic controls and the basic Dyna Comp has only two.
One thing that I need to point out is that they’re both great compressors.
In fact, I’m yet to stumble upon a guitar player who complained about MXR or Dunlop pedals.
But while they’re both great, they have a couple of important differences.
First, the Supercomp compressor has an additional attack speed control.
What’s more, this is a potentiometer, so you’ll get a lot of “in-between” options, not just “fast” and “slow.”
Another noticeable difference is the price.
Obviously, Supercomp is slightly more expensive.
But then again, both Supercomp and the basic Dyna Comp are pretty cheap.
My personal choice would be MXR Super Comp.
Then again, I’m kind of a control freak when it comes to the tone, so I love to have as many parameter controls as possible.
In short, both are great pedals for anyone who prefers to keep it simple.
So if that’s what you’re looking for, you can’t really go wrong with either.
Choosing the Right Compressor Pedal
From my experience, dynamic compression is a pretty straightforward effect.
If you know what it does and you’re familiar with its parameters then you’ll know how to use it.
However, the main differences come down to what a particular compressor offers.
Assuming that the pedal is of regular quality and has no issues, it comes down to parameter controls.
If you like it straightforward and don’t feel like bothering with a lot of features, then get a simpler one.
In case you’re an absolute control freak for all effects, then get something with more controls.
Compression is compression, and for the most part, it all works the same way.
MXR Super Comp vs Dyna Comp: Conclusion
I hope this article has helped you think through which compressor pedal is best for you!
And if you want to read more pedals on this blog, then check out:
- OCD vs Plimsoul: Which Is Better?
- Rat vs Big Muff: Which Pedal is Better?
- Fulltone Full Drive 2 vs OCD: Which is Better?
- The Best Axe Fx Alternatives
Lastly, feel free to leave a message in the comments below if you have more questions about this or another guitar-related topic!